Hello.
I have installed this card into my A2000. I am told it is a clone of the Ariadne Zorro II card designed to fit the form factor of the Amy-ITX board.
I have Roadshow 1.13 installed under OS 3.1.4. I have used this successfully with my PCMCIA adapter in an A1200.
Both ariadne and ariadne II drivers were tried.
The moment I launch the Network-Startup script, my Amiga GURUs.
Any idea what might be wrong? SysInfo sees the card.
Navigation
«
«
«
Amiga Future
«
Community
«
Knowledge
«
Last Magazine
«
Service
«
Search
«
Social Media
«
Advertisement
«
Partnerlinks
Es werden für mehr Seite noch 12 (25) neue Abos benötigt.
12 (25) new 1-Year-subscriptions are required for more pages.
Make a Subscription NOW!
More Infos: http://25.amigafuture.de
12 (25) new 1-Year-subscriptions are required for more pages.
Make a Subscription NOW!
More Infos: http://25.amigafuture.de
Roadshow and Ami-ITX network adapter
Support Roadshow
Re: Roadshow and Ami-ITX network adapter
In order to help me troubleshoot this, I decided to install another TCP/IP stack. One that was freely available and would not interfere with Roadshow (no common files).
The Genesis Demo was installed successfully. I ran the Wizard and chose the ariadne_ii.device driver (downloaded from this site https://amiga.resource.cx/exp/ariadne2 by the way).
Attached are the results of the setup. This might be useful for those in the know. A hardware problem perhaps?
I know the network connection is good because I am borrowing it from an adjacent PC box. . The cable is CAT5e and is connected to a NetGear Gigabit switch.
At least the software is reporting a MAC address which tells me it is communicating with the card.
I believe this also confirms that the ariadne_ii.device is the correct driver for this card because the Wizard did not do anything at all when I chose the ariadne.device.
The Genesis Demo was installed successfully. I ran the Wizard and chose the ariadne_ii.device driver (downloaded from this site https://amiga.resource.cx/exp/ariadne2 by the way).
Attached are the results of the setup. This might be useful for those in the know. A hardware problem perhaps?
I know the network connection is good because I am borrowing it from an adjacent PC box. . The cable is CAT5e and is connected to a NetGear Gigabit switch.
At least the software is reporting a MAC address which tells me it is communicating with the card.
I believe this also confirms that the ariadne_ii.device is the correct driver for this card because the Wizard did not do anything at all when I chose the ariadne.device.
Post Reply
2 posts
• Page 1 of 1
Jump to
- Amiga Future
- ↳ Internes
- ↳ Termine
- Computer
- ↳ Amiga und Kompatible Allgemein
- ↳ Amiga und Kompatible Spiele
- ↳ Amiga und Kompatible Hardware
- ↳ Amiga Programmieren
- ↳ Amiga Emulation
- ↳ Amiga General Chat english
- ↳ Andere Systeme
- Sonstiges
- ↳ Kleinanzeigen - Classifieds
- ↳ OffTopic
- APC&TCP
- ↳ APC&TCP-News
- ↳ APC&TCP-Support
- ↳ CygnusEd Support
- ↳ DigiBooster Support
- ↳ Roadshow Support